Concrete footings in Walnut Creek CA - solid support, planned before anyone digs
Building a deck, shed or addition and not sure what it should sit on? We plan, dig and pour the footings that hold it up.
Request an estimate
What goes into putting in concrete footings in Walnut Creek?
Concrete footings are buried concrete supports that carry the weight of a deck, a post, a shed or an addition down into the ground. In Walnut Creek, we plan, dig and pour them so whatever you build has something solid under it. A pad footing, the kind under a single post or column, does that job for one spot at a time.
Most people call us when a project is already taking shape, like a deck drawn up, a shed picked out or an old post that's started to lean, and they want to know what's involved before they commit. The price mostly moves with how many footings you need, how deep they have to go, how easy each spot is to reach and whether we have to get through an old slab first. The schedule turns less on the digging than on what has to happen before it, which is getting the utilities marked and any permit the project needs, and your written estimate lays all of that out for your lot.
How we build concrete footings
Before a hole goes in, we get the utilities marked and I look at where each footing sits, especially close to the house or a big tree, because I'd rather settle those distances early than have the digging plan change halfway through. Then our crew digs each hole to the depth the plan calls for, sets forms where the top needs a clean shape and places rebar, the steel bars that keep the concrete from pulling apart under load, along with any hardware the post or beam will tie into. We pour, shape the tops so water runs off instead of sitting against the post, and let the concrete cure, which is the wait while it hardens before it carries weight. Footings are the part of a project you'll never see once it's built, so that's where I'd rather spend the time and the budget, because a nice deck on a footing that moves is still a problem.
Footings often come up alongside other work. If a corner of the house or an old porch has already dropped, foundation raising may be the first job before new footings make sense. When a footing has to land under an existing patio or garage floor, we use concrete cutting to open a clean square rather than breaking out more than we need.
What changes a concrete footing job in Walnut Creek
In Walnut Creek, the city decides what needs a building permit, and it asks for one when you add a structure or change your property. Its permit list names decks but not footings on their own, so the list alone doesn't settle your job. We figure that out early, and when a permit is needed we handle the application and paperwork for you through the city's online permit portal, which is the only way the city takes applications now.
Hillside lots can bring in a second sign-off. The city requires a Site Development Permit for grading over 50 cubic yards or any cut over 3 feet high, and its list also names retaining walls over 3 feet above the lowest ground beside them. A handful of footing holes usually won't come near that, but a deck stepping down a slope with a wall below it can, so I look at the whole plan and not just the holes. We work out of Walnut Creek and the cities around it, and we see the same steep backyards on jobs in Lafayette and Orinda.
- Call (925) 448-9528
- Mon–Sun: 8 AM–9 PM
- Walnut Creek, CA 94596
What happens after you call Alliance Walnut Creek Concrete Company in Walnut Creek
Call or send the form
You call (925) 448-9528 or send the form, and I'm usually the one who calls you back. I'll ask what's going on top of the footings so I know what I'm looking at before I drive out.
I walk the site with you
I come out, look at where each footing would go and ask a lot of questions about the house, the trees and the slope. You get a written estimate that spells out the footings, the digging and what's included, so you know what's in the price before anything starts.
We sort paperwork and marking
Once you're ready, we take care of any paperwork and get the utilities marked or scanned before anyone digs. Walnut Creek needs an after-hours permit for construction on Saturdays and city holidays, so if a weekend pour suits you better, we add that permit to the plan.
We dig, pour and walk through
Our crew digs, sets the steel and pours, and I'm on site for the parts that matter most. At the end I walk the job with you and go over how to treat the new footings while they cure.
Why Walnut Creek homeowners call Alliance Walnut Creek Concrete Company for footings
I look at every job myself
I come out to see the site in person, and our own crew does the prep, the pour and the finish. You're dealing with the same people from the first visit to the last walk-through.
In business since 2013
I ran a landscape supply yard, learned the trade beside a seasoned finisher and started this business in 2013, so that's 13 years now. We're best known for the awkward jobs, like sloped backyards and cuts through old slabs, which is often where footings get tricky.
Licensed and insured for digging work
We're licensed and insured. That matters on footings, because digging near buried lines and right up against the house is exactly where you want the people doing it to be covered.
Big trees settled before digging
In Walnut Creek, trees 9 inches in diameter or more fall under the city's tree preservation rule. I mark footing spots near a tree like that first, so the layout doesn't have to change once the crew starts digging.
If you've got a deck, shed or addition in mind, tell us what you're planning and I'll come take a look.
Request an estimateGet a written estimate for your footings
We reply within one business day, and I'm usually the one who calls back to set a time to see the site. The estimate is free and done on site. I walk where each footing would go, ask what you have in mind and put it all in writing, with no pressure and no obligation.
- Licensed and insured.
- Phone
- (925) 448-9528
- Location
- Walnut Creek, CA 94596
- Hours
- Mon–Sun: 8 AM–9 PM
Questions about concrete footings in Walnut Creek
Do I need a permit for concrete footings in Walnut Creek?
Walnut Creek's permit list doesn't name footings on their own, so the answer comes from what the footings hold up. Decks are on the list, and the city says some small sheds may need no permit at all, so we check your project before anything is dug.
How do I find buried lines before digging footing holes?
Call 811 before anyone digs, and the local utility companies will come out and mark their buried lines. A national deck guide puts that call at the very start of the plan and keeps footings off septic systems, leach fields, utility lines and enclosed meters, so we lay out the holes around whatever gets marked.
How deep do deck footings need to be near my house?
If a deck footing sits closer than 5 feet to your house's foundation wall, a national deck guide says it should go as deep as the house's own footing. That can mean deeper holes for the posts nearest the house, so I measure those distances on the first visit and build the depth into the estimate.
Who can legally pour concrete footings in California?
A licensed contractor should pour them, unless the job is small enough for the state's minor work exemption. The Contractors State License Board describes a concrete contractor as one who forms, pours, places, finishes and installs concrete work. The exemption tops out at $1,000 and only applies when the work needs no permit and the person doing it employs no one on the project.
How much do concrete footings cost around San Francisco?
Concrete foundation work in the San Francisco metro area usually costs about $8.50 to $15.50 per square foot. That's a regional figure for foundation concrete in general, not a price for your footings, which depends on how many you need, how deep they go and how easy the spots are to reach. Your estimate puts the price for your footings in writing.
How long does a concrete footing job take?
Most footing jobs move at the pace of the steps before the pour, because the utilities have to be marked and any permit the project needs has to be in hand before we dig. After the pour, the concrete needs to cure before the deck or shed goes on top, and at the walk-through I'll tell you when it's ready for the next stage.
Other work that often goes with footings
Foundation raising
If a corner of the house or an old porch has dropped out of level, lifting it back up is often the first job before anything new gets built.
Concrete cutting
When a footing has to go under an existing patio, walkway or garage floor, a clean saw cut opens just the spot we need and leaves the rest alone.
Plan your footings before the first hole
Have the planned structure, its distance from the house and any big trees nearby in mind when you call, and the first visit gets a lot further.
Request an estimateCall (925) 448-9528